Supertek RO Systems for industrial use.
Industrial RO – Supertek 50 LPH SS
Product Description
Basics of Design & Water Treatment
PLANT INTRODUCTION
| This produces quality water at the flow rate of 50 litres per hour. It can work continuously for 8 to 9 hours per day besides 0.5 hour to 1 hour for back-washing of the filtration system. |
RAW WATER ANALYSIS
| This water treatment system is based on the following water analysis: |
| Sl. No. | Parameter | Analysis Value |
|
1.
|
Total Dissolved Solids (TDS) | 2000 ppm |
|
2.
|
Turbidity | 1 NTU |
|
3.
|
SDI | 4 |
|
4.
|
Heavy Metals | nil |
|
5.
|
Organics And Bacteria | nil |
|
6.
|
Oil And Grease | nil |
|
7.
|
Residual Chlorine | nil |
|
8.
|
Temperature | < 40˚C |
|
9.
|
Color | Colorless |
|
10.
|
Odour | Very Less Odour |
|
11.
|
BOD & COD | nil |
|
12.
|
Total Hardness | 850 PPM |
END WATER QUALITY
| Sl. No. | Parameter | Analysis Value |
|
1.
|
Total Dissolved Solids (TDS) | < 100 ppm |
|
2.
|
PH | 7.0 ± 0.2 |
|
3.
|
Turbidity | nil |
|
4.
|
Color | nil |
|
5.
|
Hardness | < 50 ppm |
RO PLANT OPERATING CONDITION
| Sl. No. | Parameter | Analysis Value |
|
1.
|
Feed Flow Rate | 125 Ltr |
|
2.
|
Product Flow Rate | 50 LPH |
|
3.
|
Rejest Flow Rate | 75 LPH |
|
4.
|
Recovery | 35 % to 40 % |
TREATMENT SCHEME
| Sl. No. | Description |
| Raw Water Storage Taken (By Client) | |
|
1.
|
Raw Water Transfer Pump |
|
2.
|
Multi–Grade Filter |
|
3.
|
Activated Carbon Filter |
| 4. | Antiscalant Dosing System |
| 5. | Micron Filter ( 20 micron & 5 micron ) |
| 6. | High Pressure Pump |
| 7. | RO Module (Membrane & Membrane Housing) |
| 8. | Flushing/Cleaning System |
| Products (Pure) Water Storge Tank (By Client) |
The end water quality is achieved subject to:
- Feed quality should be same as required. In case of any change in the quality of raw water, the same may have an implication on the operating parameters and End-Water quality of the system.
- Feed limiting is an implication on the operating parameter and end water quality of the system.
- Feed limiting condition is to be strictly maintained and operation of the water treatment plant should be strictly followed in totality as per the operating manual and instructions.
TECHNICAL SPECIFICATION
| RO 50 LPH | |
|
Product Capacity
|
50 lph |
|
Weight
|
33 Kg |
|
Dimension (L x W x H)
|
500mm X 325mm X 862mm |
|
Booster Pump
|
Diaphragm Type |
| Adopter | 36 VDC |
| Membrane | 75/100 GPD |
| See also different: | Industrial RO |