Supertek RO Systems for industrial use.

Industrial RO – Supertek 100 LPH / MS DLX

Product Description

Supertek 100 LPH / MS DLX

 

Basics of Design & Water Treatment

 

PLANT INTRODUCTION

This produces quality water at the flow rate of 100 litres per hour. It can work continuously for 8 to 9 hours per day besides 0.5 hour to 1 hour for back-washing of the filtration system.

 

RAW WATER ANALYSIS

This water treatment system is based on the following water analysis:
Sl. No. Parameter Analysis Value
1.
Total Dissolved Solids (TDS) 2000 ppm
2.
Turbidity 1 NTU
3.
SDI 4
4.
Heavy Metals nil
5.
Organics And Bacteria nil
6.
Oil And Grease nil
7.
Residual Chlorine nil
8.
Temperature < 40˚C
9.
Color Colorless
10.
Odour Very Less Odour
11.
BOD & COD nil
12.
Total Hardness 850 PPM

 

END WATER QUALITY

Sl. No. Parameter Analysis Value
1.
Total Dissolved Solids (TDS) < 100 ppm
2.
PH 7.0 ± 0.2
3.
Turbidity nil
4.
Color nil
5.
Hardness < 50 ppm

 

RO PLANT OPERATING CONDITION

Sl. No. Parameter Analysis Value
1.
Feed Flow Rate 250 Ltr
2.
Product Flow Rate 100 LPH
3.
Rejest Flow Rate 150 LPH
4.
Recovery 35 % to 40 %

 

TREATMENT SCHEME

Sl. No. Description
Raw Water Storage Taken (By Client)
1.
Raw Water Transfer Pump
2.
Multi–Grade Filter
3.
Activated Carbon Filter
4. Antiscalant Dosing System
5. Micron Filter ( 20 micron & 5 micron )
6. High Pressure Pump
7. RO Module (Membrane & Membrane Housing)
8. Flushing/Cleaning System
Products (Pure) Water Storge Tank (By Client)

The end water quality is achieved subject to:

  • Feed quality should be same as required. In case of any change in the quality of raw water, the same may have an implication on the operating parameters and End-Water quality of the system.
  • Feed limiting an implication on the operating Para meter and end water quality of the system
  • Feed limiting condition is to be strictly maintained and operation of the water treatment plant should be strictly followed in totality as per the operating manual and instructions.

 

TECHNICAL SPECIFICATION

 

1. Raw Water Transfer Pump:
Quantity required
One
Material of construction
CI
Make of material
Kirloskar/Eqvt/c.g.

 

2. Multi-Grade Filter:
Quantity required
One
Size of unit Dia × Ht
10″ × 54″
Material of Construction
FRP
Max. pressure drop 0.5Kg/cm²
Flow control Top mounted multi port valve
Media Graded silex anthracite & sand & carbon
Vessel make Water life /Aventura/roosh

 

3. Antiscaling Dosing System:
Tank
One
Capacity of tank
50 Ltr
MoC of tank
HDPE

 

4. Dosing Pump:
Quantity required
One
Type
Diapharagm type electronic pump
Capacity
0.5 LPH
Make E-dose

 

5. Micron Filter:
Quantity required 2
Type
Disposable cartridge
Operation rate 1.0m3/hr
Operation pressure 2.5Kg/cm²
Micron rating 5 micron
Type of cartridge PP wound
MoC PP

 

6. High Pressure Pump:
Quantity required One
Operating pressure 1 HP
Make of pump Sumo/Eqvt/roosh./raj/cg
Type of drive single phase

 

7. RO Membrane Housing:
Quantity required One
Material of pressure tube 40/40
Element capacity 1 nos.
Max.Working pressure 250 psi
Make Waterlife/Roosh

 

8. RO Membrane:
Quantity required One
Dimension Dia 4″, Length 40″
Working Pressure 180 psi
Element Spiral Wound Membrane
Make Filmtech Dow (USA)/Eqvt./Roosh Italy

 

9. Electrical Control Panel:
Quantity required One
Material of construction MS skid mount.
Electrical components make L&T/Siemens/Havell’s./CAURAM

 

10. Flushing Cleaning System: Connected from feed pump
Quantity required One
UPVC Fitting 1 Lot

 

INSTRUMENTS

  1. Pressure Gauges .2(PIC)
  2. Flow meters: 2 Nos. (One reject & one permeate)
  3. Pressure limiting switches: 02 Nos. Line mounted adjustable.

PIPE FITTING: UPVC

SKID: M.S.

PRICE INCLUDES

Supply and Assembling the complete reverse osmosis plant 100 LPH – One
Packing – Included
Tax and Freight – Excluded
Erection and commissioning – Included
Warranty – One Year service free .. if spare parts need to be replace that will not be charged except membranes.
Delivery – Within 7 days from the date of purchase order with 50% advance payment.
Payment – 50% Advance; 45% at the time of delivery; balance 5% after installation.
VAT – 12.5% extra. Octroi and freight extra as applicable.

EXCLUSIONS

The following are specifically excluded from our scope of work:

  • All process inputs, utilities such as tube well for water, power supply and distribution system, inlet-outlet piping etc.
  • Fire fighting equipments.
  • All civil work including building, shed, foundation, roads, ramps, storage tanks etc.
  • Warehousing, storage and safe custody of equipment and other plants item received at site.
  • Temporary power supply during construction and erection of plant.
  • Effluent treatment.
  • Any other services/equipment not specifically mentioned.
  • Model of the plant.
See also different:Industrial RO